Skip to content
Cart
Induction cooktop

Switching from Gas to Induction: Australian Home Guide

Across Australia, a quiet kitchen revolution is under way. Households that cooked on gas for decades are switching from gas to induction — and it's no longer only the early adopters. Rising daily gas supply charges, the spread of rooftop solar, growing awareness of indoor air quality, and Victoria's move to all-electric new homes have all turned induction from a niche choice into a mainstream one.

But deciding to switch is one thing; knowing what the switch actually involves is another. Do you need an electrician? What happens to your gas line? Will your current pots still work? And what does it all cost? This guide answers those questions step by step, so you can make the move with confidence and no nasty surprises.

(If you're still weighing up the two technologies, start with our full comparison of gas and induction cooktops first, then come back here when you're ready to plan the switch.)

Why Australians are switching to induction

You've probably got your own reason for considering the change, but these are the big ones driving the trend:

  • Cutting the gas bill entirely. If the cooktop is your last gas appliance, going all-electric lets you disconnect gas and stop paying the daily supply charge — often the biggest real saving.
  • Solar. With rooftop panels, induction can run on close to free power during the day.
  • Safety. No open flame, a surface that stays cool away from the pan, and auto shut-off when the pan is removed.
  • Easier cleaning. One flat glass surface instead of grates, trivets and burner caps.
  • Regulation. In Victoria, most new homes needing a planning permit must now be all-electric, and other jurisdictions are exploring similar paths.

Before you switch: is your home ready?

The single most important thing to check is your electrical supply. Induction cooktops draw significant power, and a full-size unit usually needs its own dedicated circuit.

  • Switchboard capacity. Older homes may have a switchboard that needs upgrading to handle a new high-amperage circuit. A licensed electrician can assess this quickly.
  • A dedicated circuit. Larger 60cm and 90cm induction cooktops typically require a dedicated circuit (commonly 32A, but always follow the product's specs and your electrician's advice) rather than sharing a general power point.
  • Cable run. The electrician will run suitable cabling from the switchboard to the cooktop location.

None of this is unusual or dramatic — it's routine work for a licensed electrician — but it's the part people most often overlook when budgeting. Always have the electrical side assessed before you buy.

How to switch from gas to induction: step by step

Step 1 — Get your electrical supply assessed

Book a licensed electrician to check your switchboard and confirm you can run a dedicated circuit for the new cooktop. This determines both feasibility and cost, so do it first.

Step 2 — Choose the right induction cooktop

Measure your benchtop cutout and think about how you cook. ROBAM's induction cooktops in 60cm and 90cm suit most Australian kitchens: 60cm is the standard four-zone size for apartments and compact kitchens, while 90cm gives you more zones and room for larger pans — ideal if you cook a lot at once or use a big flat-bottomed wok. Browse the full induction cooktops range to compare power levels and features.

Step 3 — Safely decommission the gas

Your old gas cooktop must be disconnected and the gas point capped by a licensed gasfitter — this is not a DIY job. If the cooktop is your only remaining gas appliance, this is also the moment to arrange full disconnection with your energy retailer so you stop paying the gas supply charge.

Step 4 — Install the new circuit and cooktop

The electrician installs the dedicated circuit and hardwires or connects the new induction cooktop. Confirm the benchtop cutout matches your chosen model before installation day — induction and gas cutouts aren't always identical, and a stone benchtop may need adjusting by a stonemason.

Step 5 — Sort your cookware

Induction only works with magnetic (ferrous) cookware. Before the installer leaves, test your pots: if a fridge magnet sticks firmly to the base, the pan will work. Most stainless steel and all cast iron are fine; many aluminium and copper pans are not, unless they have an induction-compatible base. Budget for a few new pans if needed.

Step 6 — Review your ventilation

Switching cooktops is the perfect time to check your rangehood (more on this below).

What does switching cost?

Costs vary by home, but a realistic budget has three parts beyond the cooktop itself:

  • The induction cooktop — your main purchase.
  • Electrical work — the dedicated circuit, and a switchboard upgrade if your home needs one.
  • Gasfitting — disconnecting and capping the old gas point, plus any full gas disconnection.
  • Possible extras — new induction-compatible cookware and, if the cutout differs, benchtop adjustment.

The upside is ongoing: lower running costs (especially with solar), and the potential to remove the daily gas supply charge for good. For many households, the switch pays back over time rather than costing money forever.

Cookware: what you'll need

This is the one practical change that catches people out. The magnet test is your friend: a strong fridge magnet that grips the base means the pan is induction-ready. Cast iron, enamelled cast iron and most quality stainless steel work beautifully. Pure aluminium, copper, glass and ceramic cookware won't — unless specifically made with an induction base. If you're a wok cook, buy a flat-bottomed wok designed for induction rather than trying to use a traditional round-bottomed one.

Don't forget ventilation when you switch

A persistent myth says induction is so clean you can skip the rangehood. Not true. Induction removes combustion fumes, but the cooking still produces grease, steam and fine particles — especially when you fry or sear. Whenever you change your cooktop, review your extraction at the same time.

If you're in an apartment or a home where ducting outside isn't possible, convertible rangehoods let you run in recirculating mode with a filter, so you still get effective capture without an external duct. Matching a quality rangehood to your new induction cooktop keeps your kitchen clean and your air healthy.

Should you make the switch?

Here's a quick guide to whether now is the right time:

  • Building or renovating: yes — it's the cheapest, cleanest time to go all-electric, and in parts of Victoria it's required.
  • You have solar: strong yes — you'll run induction close to free on sunny days.
  • Gas is your last gas appliance: yes — dropping the supply charge often makes the switch pay for itself.
  • You rent: talk to your landlord — the electrical work makes this an owner's decision, though some are happy to upgrade.
  • Your gas cooktop is near end of life: yes — replacing it anyway is the natural moment to switch.

The Victorian gas ban: why timing matters

Victoria now requires most new homes that need a planning permit to be all-electric, removing new gas connections for cooktops, hot water and heating, with electrification policy continuing to develop. Other states and local councils are watching closely and exploring their own pathways. Rules differ by state and change over time, so confirm the current requirements for your area before you build or renovate. For many Australians, switching to induction now simply gets ahead of where the country is clearly heading.

ROBAM makes switching easy

As the world's No.1 rangehood brand, ROBAM has spent over four decades engineering appliances for high-heat cooking — so when you switch to induction, you don't give up power. ROBAM's induction cooktops bring genuine performance, fast response and effortless cleaning to all-electric kitchens, and many sit among our best sellers because they're built for the way Australians actually cook. Keep an eye on our new arrivals for the latest models, and pair your new cooktop with a matching ROBAM rangehood for a complete, future-ready kitchen.

Frequently asked questions

Do I need an electrician to switch to induction?
Yes. A full-size induction cooktop needs a dedicated circuit installed by a licensed electrician, and older homes may need a switchboard upgrade. You'll also need a licensed gasfitter to disconnect and cap the old gas point.

Can I use my existing pots and pans?
Only if they're magnetic. Test with a fridge magnet on the base — if it sticks firmly, the pan works. Most stainless steel and all cast iron are fine; many aluminium and copper pans aren't.

Is it worth switching if I don't have solar?
Often yes — especially if the cooktop is your last gas appliance, since you can drop the daily gas supply charge. Induction is also safer and far easier to clean.

Does switching to induction mean I can remove my rangehood?
No. Cooking still produces grease, steam and fine particles. Keep a properly sized rangehood — or a convertible model if you can't duct outside.

Will a 60cm induction cooktop fit where my gas one was?
Often, but not always — induction and gas cutouts can differ. Always check the new model's cutout dimensions against your benchtop before installation.

Ready to switch?

Making the move from gas to induction is easier than most people expect — and ROBAM has a cooktop engineered for the way you cook. Explore ROBAM induction cooktops and start planning your all-electric kitchen today.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store